Olympus D-360L - Manual (Page 70)

70
SETTING RESET
You can save your settings even after the power is turned off.
Open the lens barrier and
press the Menu button several
times to display the screen
shown.
Select RESET or HOLD using
the +/– buttons, then press the
OK button to save the setting.
• If the Menu button is pressed
while the setting is being
entered, it will be canceled and
the next setting menu will
appear.
With RESET selected, the settings
of the following items will be
canceled and reset to the default
when the power is turned off.
Flash modes (p. 49),
Exposure compensation (p. 57),
Spot metering mode (p. 58),
White balance (p. 61),
ISO (p. 62),
Setting reset (p. 70)
2
1
Note:
• Even when HOLD is selected, the settings for Exposure compensation
(p. 57), Spot metering mode (p. 58), White balance (p. 61) and ISO (p.
62) will be canceled and returned to the default when the batteries are
taken out.
SET OK NEXT
RESET
HOLD
1 2
LCD monitor