56 en, T (settings 3) x manometer, T (settings 3) x tap control – Olympus Tough TG-810 User Manual

Page 56

Advertising
background image

56 EN

For information on using the menus, see “Setup menu” (p. 6).

Displaying the current altitude/water

Displaying the current altitude/water
depth (atmospheric/hydraulic pressure)

depth (atmospheric/hydraulic pressure)
[Manometer]

[Manometer]

t (Settings 3) X Manometer

The readings may have a margin of error depending

on meteorological conditions. Use the readings only
for your reference.

Submenu 2 Submenu 3

Application

Manometer

Off

Cancels the manometer
display.

On

Displays the current
altitude/water depth
(atmospheric/hydraulic
pressure) in the shooting
standby mode screen.
(–10 m to 5,000 m)

Calibrate

Proceed to the setting
screen. See below.

m/ft

m

This displays in meters.

ft

This displays in feet.

When set to [On], a warning message appears in

the monitor as a water depth close to 7 m (22.9 ft) is
reached.

To adjust the altitude/water depth display

To adjust the altitude/water depth display

1

Use

FG to select the current altitude/water depth,

and press the

A button to set.

Calibrate

OK

Set

MENU

Exit

1200 m

1200 m

Operating the camera by tapping the

Operating the camera by tapping the
body [Tap Control]

body [Tap Control]

t (Settings 3) X Tap Control

Submenu 2

Application

Off

Cancels [Tap Control].

On

[Tap Control] is activated.

Calibrate

Adjusts the tap strength and
intervals between multiple taps
on each side of the camera body.
(top, left, right, & back)

Operating during shooting mode

Operating during shooting mode
(Example: Flash mode)

(Example: Flash mode)

1 Tap the right or left side of the camera body once.

Then tap the top side of the camera once.

The fl ash mode selection screen is displayed.

2 Tap the right or left side of the camera body to select a

function.

3 Tap the back of the camera body twice to confi rm your

selection.

14

M

44

P

P

0.0

0.0

AUTO

WB

AUTO

WB

AUTO

ISO

AUTO

ISO

Flash Auto

Flash Auto

MENU

MENU

N

ORM

Tap the camera fi rmly using the pad of your fi nger.

When the camera is stabilized on a tripod for

example, tap control may not work properly.

To prevent dropping the camera when using tap

control, strap the camera to your wrist.

Advertising