Olympus C-720 Ultra Zoom - Manual (Page 105)

Chapter 8
Useful Functions
104
Items that All Reset affects
Setting
Factory default
setting
ISO (P. 82) AUTO
(P. 64) ±0
DIGITAL ZOOM
OFF
(P. 59)
(for still pictures)
HQ
(P. 78)
WB (P. 85) AUTO
SHARPNESS (P. 86) NORMAL
CONTRAST (P. 86) NORMAL
Setting
Factory default
setting
P/A/S/M (P. 44 – 46) P
FNo (P. 47, 49) F2.8
SHUTTER (P. 48) 1/500
(P. 84) ±0
ZOOM (P. 59) 40mm
FLASH MODE (P. 60) AUTO
(P. 65) OFF
DRIVE (P. 71)
All reset
— Saving the camera’s settings
This function lets you choose whether or not the camera saves its current
settings.
OFF: The settings made just before the power is turned off are saved.
ON : All settings are returned to the factory default settings.
The settings affected by All Reset are listed below.
The ALL RESET setting (ON/OFF) applies to all the modes. If ALL RESET is
set to OFF in one shooting mode, this setting applies to all other shooting
modes, as well as the playback and
modes.
ALL RESET cannot be set in the mode.
When ALL RESET is set to OFF, the OFF setting does not apply to functions
(For example,
: setting flash mode, drive mode, etc.) that are not
available in the current mode.
All Reset does not affect the menu’s SETUP items.
Mode dial
setting
In the top menu, select MODE MENU T SETUP T ALL RESET T ON or
OFF. Press
. Press again to cancel the menu.
~
“How to use the
menu” (P. 38)
Factory default setting: ON