Chapter 10 – Olympus C-720 Ultra Zoom User Manual

Page 127

Advertising
background image

126

Chapter 10

Troubleshooting (Cont.)

POSSIBLE CAUSES

CORRECTIVE ACTION

REF. PAGE

1 The flash is pushed

down.

2 The subject is lighted.
3 The drive mode is set

to auto-bracketing.

4 The drive mode is set

to sequential shooting
or AF sequential
shooting when using
the Red-Eye Reduction
or Night Scene With
Red-Eye Reduction
flash mode.

5 You are recording

movies.

6 Panorama shooting is

set.

1 Press the flash switch to

raise the flash.

2 Set the flash to Fill-In mode.
3 Press DRIVE to change to

single-frame shooting.

4 Press DRIVE to change to

single-frame shooting.

5 Set the mode dial to any

position other than

.

6 Cancel the Panorama mode.

P. 62

P. 62
P. 71

P. 71

P. 44

P. 75

The date recorded with the image data is wrong.

1 The date is not set.

2 The camera has been

left for too long with the
batteries removed and
the date/time setting
was canceled.

1 Set the date. The clock

adjustment is not factory-
preset.

2 Set the date again.

P. 29

P. 29

Your customized settings have been canceled.

1 You turned off the

power without saving
the settings.

1 Set ALL RESET to OFF.

P. 104

The flash does not fire.

Advertising