Olympus C-3000 Zoom - Manual (Page 33)

183
USING A PERSONAL
COMPUTER
Make sure that the power of the personal computer and the
camera are OFF.
Connect the provided USB cable or optional RS-232C PC serial
cable to your computer. (See the previous page for details)
Remove the lens cap, and connect the cable to the camera’s
USB connector or computer connector, then turn on your
computer.
Set the Mode dial on the camera to .
Start CAMEDIA Master on the computer.
5
4
3
2
1
Note:
• If you are using a USB cable to make connections, make sure that your
personal computer support it. Contact your personal computer maker
concerning your personal computer’s environment.
• Communications with a personal computer cannot be accomplished with
a USB cable alone. Be sure to download images using CAMEDIA Master.
• If a USB connection is used, make sure that USB is operating normally on
the personal computer. For more information, consult your personal
computer’s operation manual.
USB connector
Computer
connector
(RS-232C)