Olympus FE-340 - Manual (Page 31)

Menu
o
perat
ion
s
EN
31
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV’s video signal type.
• TV video signal types differ by country/region. Check the video signal type before connecting the camera
to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
When no operation has been performed for approximately 10 seconds while in shooting mode, the monitor
automatically shuts off. Pressing the zoom lever or other buttons restores the camera from power save mode.
VIDEO OUT .................................................................................. Playing back pictures on a TV
NTSC /PAL
POWER SAVE ..................................................... Setting the camera to the power save mode
OFF /ON
Settings on the TV
Turn the TV on and set it to video input mode.
• For details of switching to video input, refer to
your TV’s instruction manual.
• Images and the information displayed on the
screen may be cropped depending on the TV’s
settings.
Settings on the camera
Turn the camera on and press q to select the
playback mode.
• The last picture taken is displayed on the TV.
Use the arrow pad to select the picture you want
to display.
AV cable (provided)
Multi-connector
FE-320/X-835/C-540
AV cable (provided)
Multi-connector
FE-340/X-855/C-560
Connect to the TV’s
video input (yellow) and
audio input (white)
terminals.
Connector cover
d4362_63_e_0000_7.book Page 31 Tuesday, November 13, 2007 8:43 PM