Olympus SP-500 UZ - Manual (Page 45)

45
3
Basi
c shooti
ng
functi
ons
Slave flash shooting (FLASH)
Slave flash shooting ( Q FLASH)
This setting is for when using a commercially available slave flash that is
synchronized with the camera flash.
The amount of light emitted by the flash can be adjusted in 10 levels. The
flash can fire in sequential shooting mode, but the interval between shots
will be longer if a high emission level is set.
Flash mode automatically changes to [
#] for all flash modes except [$].
Top menu [MODE MENU] [CAMERA] [QFLASH] [SLAVE]
g“Using the menus” (P. 17)
1
Select an emission level from [1]
to [10], then press Z.
This function allows you to record movies.
1
Compose your picture.
• You can use the zoom lever to enlarge
your subject.
SLAVE FLASH
OK
1
SELECT GO
Recording movies
00:36 00:36 00:36
HQ HQ
0.0 0.0
Remaining
recording time