Olympus EVOLT E-330 - Manual (Page 14)

14
En
Basic operation
Pictures can sometimes appear blurred as a result of moving the camera
while the shutter button is being pressed.
To prevent the camera from moving, hold the camera firmly with both hands
while keeping your elbows at your sides. When taking pictures with the
camera in the vertical position, hold the camera so that the flash is positioned
above the lens. Keep your fingers and the strap away from the lens and the
flash.
Remove the lens cap, and while looking
though the viewfinder, rotate the diopter
adjustment dial little by little.
When you can see the AF frame clearly,
adjustment is complete.
The monitor’s angle can be changed to suit the environment for taking
pictures.
Notes
• Do not exert strong force on the monitor. When mounting the camera on a
tripod, take care not to hit the bottom of the monitor on the pedestal.
• Make sure not to damage the rear side of the monitor and the metal fitting
area.
Holding the camera
Vertical grip Horizontal grip
Adjusting the viewfinder’s diopter
AF frame
Viewfinder
Diopter adjustment dial
Adjusting the monitor’s angle
2
3
1
The angle can be changed within
the dotted lines’ range.
s003_En-Fr-Es-De.book Page 14 Tuesday, December 27, 2005 4:34 PM