Olympus EVOLT E-330 - Manual (Page 8)

8
En
Preparations
*1 Blinks in the viewfinder.
*2
Your digital camera’s power consumption varies greatly depending on
usage and operating conditions. Under some operating conditions, the
camera may turn off without warning when the battery power is low.
Dust reduction function operation
The dust reduction function is automatically activated when the camera is
turned on. Ultrasonic vibrations are used to remove dust and dirt from the
image pickup device’s filter surface. The SSWF (Super Sonic Wave Filter)
indicator blinks while dust reduction is working.
Power on
SSWF indicator
Set the power switch to ON.
To turn off the power, set the power switch to
OFF.
Set the mode dial
to P.
Monitor
When the camera is turned on, the
control panel screen is displayed on
the monitor.
If the control panel screen does not
appear, press the
INFO button.
INFO button
Lights (green)
Remaining power
level: High.
*2
Lights *1 (red)
Remaining power level:
Low.
Charge soon.
[BATTERY EMPTY] is
displayed.
Remaining power level:
Exhausted.
Battery check
When the camera is turned on or when remaining battery power is low, the
battery check mark varies.
s003_En-Fr-Es-De.book Page 8 Tuesday, December 27, 2005 4:34 PM