Olympus 1060 - Manual (Page 30)

30 EN
Shooting pictures sequentially while the
shutter button is held down [DRIVE]
K CAMERA MENU DRIVE
: K s
Submenu 2 Application
o
One frame is shot each time the
shutter button is pressed.
j *1
Take sequential shots using the focus
and brightness (exposure and white
balance) set in the fi rst frame.
c
The camera takes sequential shots at
a faster speed than in [j].
d
The camera takes sequential shots at
approximately 9 frames/sec.
*1 The shooting speed varies depending on the settings
for [
D IMAGE QUALITY] (p. 28).
“To save only selected images
from sequentially shot images
([SHOOT & SELECT 1/2] mode)” (p. 32)
When set to c, the fl ash is limited to either #
or $. When set to d, the fl ash is fi xed to $.
When set to c or d, [IMAGE SIZE] is
limited to [I] or lower, and [ISO] is fi xed
to [AUTO]. Moreover, [FINE ZOOM] (p. 30),
[DIGITAL ZOOM] (p. 30), and [R](Sound
recording) (p. 31) are not available.
Shooting at higher magnifi cations than
optical zoom without reducing the image
quality [FINE ZOOM]
K CAMERA MENU FINE ZOOM
: K s
Submenu 2 Application
OFF
Only optical zoom is used to zoom in
for shooting.
ON
Optical zoom and image cropping
are combined to zoom in for shooting
(up to 40
×).
This function will not reduce image quality
because it does not convert images with fewer
pixels into images with more pixels by adding
pixels to a cropped image.
When set to [ON], [IMAGE SIZE] is limited to
[H] or lower.
This setting is not available when [DIGITAL
ZOOM] is set to [ON].
This function is not available when [ % SUPER
MACRO] (p. 22) is selected.
Shooting at higher magnifi cations than
optical zoom [DIGITAL ZOOM]
K CAMERA MENU DIGITAL ZOOM
: K s A
Submenu 2 Application
OFF
Only optical zoom is used to zoom in
for shooting.
ON
Optical zoom and digital zoom are
combined to zoom in for shooting
(Approx. 35x (max.)).
The setting is not available when [FINE ZOOM]
is set to [ON].
This function is not available when [ % SUPER
MACRO] (p. 22) is selected.