Olympus 1060 - Manual (Page 32)

32 EN
Selecting a scene mode according to the
shooting situation [
/ s]
/ s
: s
In s mode, the optimum shooting settings
are pre-programmed for specifi c shooting
scenes. For this reason, settings may not be
changed in some modes.
Submenu 1 Application
B PORTRAIT/
F LANDSCAPE/
D LANDSCAPE+PORTRAIT/
G NIGHT SCENE *1 /
M NIGHT+PORTRAIT/
C SPORT/N INDOOR/
W CANDLE/
R SELF PORTAIT/
c AVAILABLE LIGHT/
S SUNSET *1 /
X FIREWORKS *1 /V CUISINE/
P BEHIND GLASS/
d DOCUMENTS/
i AUCTION *2 /
e SHOOT & SELECT 1 *2 /
f SHOOT & SELECT 2 *3 /
S SMILE SHOT *2 /
q BEACH & SNOW/
Y PRE-CAPTURE MOVIE
The camera takes
a picture using the
optimum settings for
the scene conditions.
*1 When the subject is dark, noise reduction is
automatically activated. This approximately doubles the
shooting time, during which no other pictures can be
taken.
*2 The focus is locked at the fi rst frame.
*3 The camera focuses for each frame.
Shooting with a selected scene
“Using the best shooting mode for the
scene (
s mode)” (p. 18)
Saving only selected images
from sequentially shot images
([SHOOT & SELECT 1/2] mode)
1 Select [e SHOOT & SELECT 1] or [f
SHOOT & SELECT 2]. Hold down the
shutter button to take sequential shots.
OK S MENU BACK GO
Thumbnails of
sequentially
shot images
Icon for selected
mode
Selected image
Select and erase screen
2 Use the 34 to select the image to be
erased, and press the  button.
OK S GO
R mark will be
placed on the image(s)
to be erase.
3 Repeat Step 2 to select the images to be
erased, and then press the S button to
erase the selected images.
Detecting a smiling face to release the
shutter automatically
([S SMILE SHOT] mode)
1 Select [S SMILE SHOT], and aim the
camera toward the subject.
The self-timer lamp turns on. When a smiling
face is detected, the camera automatically takes
3 sequential shots.
Pictures can also be taken manually by
pressing the shutter button.
The camera may not be able to detect a
smiling face for some subjects.
●