Battery handling precautions, Lcd monitor, Legal and other notices – Olympus FE-360 User Manual

Page 51: 1 en

Advertising
background image

1

EN

Battery Handling Precautions

This camera uses a lithium ion battery specified by

Olympus. Do not use any other type of battery.

If the battery’s terminals get wet or greasy, camera

contact failure may result. Wipe the battery well

with a dry cloth before use.

Always charge a battery when using it for the first

time, or if it has not been used for a long period.

When operating the camera with battery power

at low temperatures, try to keep the camera and

spare battery as warm as possible. A battery that

has run down at low temperatures may be restored

after it is warmed at room temperature.

The number of pictures you can take may vary

depending on the shooting conditions or battery.

Before going on a long trip, and especially before

traveling abroad, purchase extra batteries. A

recommended battery may be difficult to obtain

while traveling.

Please recycle batteries to help save our planet’s

resources. When you throw away dead batteries,

be sure to cover their terminals and always

observe local laws and regulations.

LCD Monitor

Do not push the monitor forcibly; otherwise the

image may become vague, resulting in a playback

mode failure or damage to the monitor.

A strip of light may appear on the top/bottom of the

monitor, but this is not a malfunction.

When a subject is viewed diagonally in the

camera, the edges may appear zigzagged on the

monitor. This is not a malfunction; it will be less

noticeable in playback mode.

In places subject to low temperatures, the LCD

monitor may take a long time to turn on or its

color may change temporarily. When using the

camera in extremely cold places, it is a good idea

to occasionally place it in a warm place. An LCD

monitor exhibiting poor performance due to low

temperatures will recover in normal temperatures.

The LCD used for the monitor is made with

high-precision technology. However, black spots

or bright spots of light may appear constantly on

the LCD Monitor. Due to its characteristics or the

angle at which you are viewing the monitor, the

spot may not be uniform in color and brightness.

This is not a malfunction.

Legal and Other Notices

Olympus makes no representations or warranties

regarding any damages, or benefit expected by

using this unit lawfully, or any request from a third

person, which are caused by the inappropriate use

of this product.

Olympus makes no representations or warranties

regarding any damages or any benefit expected

by using this unit lawfully which are caused by

erasing picture data.

Advertising
This manual is related to the following products: