Olympus E-500 - Manual (Page 22)

22
Control panel screen and function settings
1
Basic operat
ion
s
Setting on the control panel screen
1
Press the i button.
• The cursor on the control panel screen lights.
2
Use the arrow pad to move the cursor to
the function you want to set.
Ex.) When setting white balance
3
Press the i button.
• The direct menu is displayed.
4
Use the control dial to set.
• You can also use the control dial to make settings on the control panel screen
display after completing step 2.
• If you do not operate the control dial within a few seconds ("Button timer" g
P. 136), the control panel screen will be restored and your setting will be
confirmed. Your setting can also be confirmed by pressing the
i button.
Cursor
Control panel screen
4
1, 3 2
Direct menu
This manual shows the control panel
operation procedures (until the direct menu
is displayed) as below.
Ex.) When setting white balance
i WB i
Control panel operation procedures