Single-frame playback – Olympus E-500 User Manual
Page 98
98
Playb
ack
7
Single-frame playback
There are several different ways to view and edit images. However, before
using any of these functions, follow step 1 below.
1
Press the
q
(playback) button.
• The monitor turns off after about 1
minute if no operations are
performed. If no operations are done
after that, the camera turns off
automatically (the factory default
setting is four hours). Turn on the
camera again.
2
Use
to select images you want to view.
• To exit the playback mode, press the
q button.
• Pressing the shutter button halfway resumes the shooting mode.
q button
The last recorded image appears.
a Displays the frame that is stored 10 frames back.
c
Displays the frame that is stored 10 frames ahead.
d Displays the next
frame.
b Displays the previous
frame.