27 en, Creating panoramic images ( p mode) – Olympus SH-21 User Manual

Page 27

Advertising
background image

27

EN

2

Use

HI to select the mode and then press

the

A button.

16

M

44

0.0

0.0

AUTO

WB

AUTO

WB

N

ORM

Pop Art

Pop Art

Icon indicating P mode
that is set

Shooting mode

Application

MAGIC FILTER

1

Pop Art

2

Pin Hole

3

Fish Eye

4

Drawing

*1

5

Soft Focus

6

Punk

7

Sparkle

8

Watercolor

9

Refl ection

0

Miniature

*1

Two images are saved, an unmodifi ed image and an
image to which the effect has been applied.

In P mode, the optimum shooting settings are pre-

programmed for each scene effect. For this reason,
some settings cannot be changed in some modes.

The selected effect is applied to the movie. The effect

may not be applied depending on the shooting mode.

Creating panoramic images (p mode)

1

Set the shooting mode to p.

2

Use

HI to select the mode. When selecting

[Auto], press

G

. When selecting other than

[Auto], press the

A button.

44

N

ORM

Auto

Auto

0.0

0.0

AUTO

WB

AUTO

WB

FULL

AUTO

AUTO

PC

PC

MANUAL

MANUAL

Submenu

Application

Auto

Panorama images are automatically
combined just by swinging the camera in
the shooting direction. Press the shutter
button once to begin the sequence.

Manual

Three frames are taken and combined
by the camera. The user composes
the shots using the guide frame and
manually releases the shutter.

PC

The frames that were taken are
combined into a panorama image using
the PC software.

3

When shooting with [Auto]

Use

HI to select the angle of view and then

press the

A button.

For details on installing the PC software, see “Setting

up using the supplied CD” (p. 15).

When set to [Auto] or [Manual], [Image Size]

(p. 38) is fi xed to 2MB or equivalent.

The focus, exposure, zoom position (p. 19), and white

balance (p. 32) are locked at the fi rst frame.

The fl ash (p. 20) is fi xed to

$ (Flash Off) mode.

Advertising