Olympus SH-21 - Manual (Page 29)

29 EN
Shooting 3D images (W mode)
In this mode, 3D images are shot for viewing on
3D-compatible display devices.
Images shot in 3D mode cannot be displayed in 3D
on this camera’s screen.
1
Set the shooting mode to W.
2
Use HI to select [Auto] or [Manual] and
then press the A button to set.
MENU MENU
0.0 0.0
N ORM 16 M
44
Auto Auto AUTO AUTO MANUAL MANUAL
Submenu 1 Description
Auto
After shooting the fi rst frame, overlap
the subject with the image in the
screen. The next frame is taken
automatically.
Manual
After shooting the fi rst frame, move
the camera to overlap the subject
with the image in the screen. Then
manually release the shutter.
Depending on the subject or the situation (if the
distance between the camera and subject is too
short), the image may not look 3D.
The 3D viewing angle varies depending on the
subject, etc.
The fi rst shot image is displayed on the screen lightly.
Decide the position by referencing the image.
To exit 3D shooting mode without saving an image,
press the  button.
The [Image Size] (p. 38) is fi xed to [0].
The zoom ratio is fi xed.
The focus, exposure and the white balance are fi xed
when the fi rst image is taken.
The fl ash is fi xed to [ $Flash Off].
Shooting a still image with movie clip
(  mode)
When shooting a still image, a movie clip that includes before
and after the shutter release is recorded simultaneously.
1
Set the shooting mode to  (Photo with A
Clip).
16 M
44 16 M
44
. .
N ORM
REC REC 7s 7s 3s 3s
0.0 0.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
2
Use HI to select the length of movie clip
and then press the A button.
16 M
44
00:34 00:34
N
ORM
0.0 0.0
AUTO
WB
AUTO
WB
7 sec / 3 sec 7 sec / 3 sec . .
AUTO
ISO
AUTO
ISO
Icon indicating the movie length
that is set