Olympus FE-370 - Manual (Page 28)

 EN
1 Use abcd to select the direction that the frames are combined.
2 Press the shutter button to take the first frame, and then compose the second shot.
The part of the previous picture where it will be joined to the next picture does not remain in the frame. You
have to remember what the part in the frame looked like and take the next picture so it overlaps.
3 Repeat Step 2 until the number of required frames is taken, and then press the o button
when done.
When the g mark is displayed, you cannot continue shooting any further. Panorama shooting is
possible for up to 10 frames.
Refer to the OLYMPUS Master 2 help guide for details on how to make panorama images.
●
Selecting the focusing area [AF MODE]
K CAMERA MENU  AF MODE
: P M B E f
Submenu 2 Application
FACE DETECT *1
This is used for taking pictures of
people. The camera automatically
detects and focuses on a face. A
frame is displayed at the focusing
position.
iESP
This enables you to compose the
shot without worrying about the
focusing position. The camera
finds the subject to focus on and
automatically adjusts the focus.
SPOT
The camera focuses on the
subject located within the AF
target mark.
*1 For some subjects, the frame may not appear or
may take some time to appear.
Selecting a scene mode according to
the shooting situation [
f]
 f
: f
In f modes, the optimum shooting
settings are pre-programmed for specific
shooting scenes. For this reason, settings
may not be changed in some modes.
Submenu 1 Application
G NIGHT SCENE *1 /
C SPORT/N INDOOR/
W CANDLE/R SELF
PORTRAIT/S SUNSET *1 /
X FIREWORKS *1 /
P BEHIND GLASS/
V CUISINE/d DOCUMENTS/
i AUCTION/l SMILE SHOT
The camera takes a
picture in the mode
for the shooting
scene.
*1 When the subject is dark, noise reduction is
automatically activated. This approximately doubles
the shooting time, during which no other pictures
can be taken.
To select a mode
“Using the best mode for the shooting
scene (
M, B, E, f mode)” (p. 18)