Olympus FE-370 - Manual (Page 47)

---- -- -- -- --
X
Y M
Y M D
D TIME
MENU CANCEL
 EN
“Vertical lines appear on the screen”.
Vertical lines may appear on the screen when the
camera is pointed at an extremely bright subject
under a clear sky and so on. The lines do not
appear, however, in the final image.
“The light is caught in the picture”
Shooting with flash in dark situations results in
an image with many flash reflections on dust in
the air.
Date and time function
“Date and time settings return to the
default setting”.
If the batteries are removed and left out of the
camera for about three days *2 , the date and time
settings return to the default setting, and must
be reset.
*2 The time until the date and time settings
return to the default setting varies depending
on how long the batteries have been loaded.
“Setting the date and time” (p. 13)
●
●
●
Error message
When one of the messages below is
displayed on the monitor, check the
corrective action.
Error message Corrective action
q
CARD ERROR
Card problem
Insert a new card.
q
WRITE
PROTECT
Card problem
Use a computer to cancel the
read-only setting.
>
MEMORY FULL
Internal memory problem
Insert a card.
Erase unwanted images. *1
•
•
q
CARD FULL
Card problem
Replace the card.
Erase unwanted images. *1
•
•
OK SET
CARD SETUP
CLEAN CARD
FORMAT
Card problem
Use ab to select [CLEAN
CARD], and press the
o button. Take out the card,
wipe the contact area (p. 52)
with a soft, dry cloth, and then
load the card again.
Use ab to select
[FORMAT], and press the
o button. Next, use ab
to select [YES], and press the
o button. *2
•
•
IN
OK SET
MEMORY SETUP
POWER OFF
MEMORY FORMAT
Internal memory problem
Use ab to select [MEMORY
FORMAT], and press the
o button. Next, use ab
to select [YES], and press the
o button. *2
L
NO PICTURE
Internal memory/Card problem
Take pictures before viewing
them.
r
PICTURE
ERROR
Problem with selected image
Use photo retouch software,
etc. to view the image on a
computer. If the image still
cannot be viewed, the image file
is corrupted.