Olympus E-600 - Manual (Page 104)

104
EN
Cust
o
m
izi
n
g
your
c
a
mer
a
8
Z K UTILITY
PIXEL MAPPING gP. 123
CLEANING MODE gP. 123
EXT. WB DETECT
You can disable the white balance sensor used to determine the light source during auto
white balance. This is useful when the light source near the sensor and the light source
illuminating the subject are different.
AF FOCUS ADJ.
You can use the AF sensor to fine-adjust the focusing position to a range of ±20 steps (–: closer,
+: toward )). Normally, there is no need to change this.
[SET AF DATA]
Fine-adjust the AF default value and register the setting. You can also register the
setting according to the lens.
[OFF]
AF focus adjustment is not performed.
[DEFAULT DATA]
Registers and applies all lens AF
adjustment values not registered
individually.
[LENS DATA]
Fine-adjusts the AF for each lens. You
register the adjustment values for up to 20
lenses.
x
Notes
• Depending on the adjustment made, the lens may not focus toward the ) or near side.
• When using a teleconverter, the teleconverter and lens are registered as a set.
• Only Four Thirds lenses can be registered.
[DATA LIST]
This displays the lens information registered with [LENS DATA] from [SET AF
DATA]. Select a lens from the list, and then check, delete, or edit the registration
information.
LENS DATA SET
No.1 No.1
14-42 F3.5-5.6
14-42 F3.5-5.6
S/N 000000000
S/N 000000000
EC00
S/N 888888888
±88
+20
±88 W
T
CANCEL SET
Use fg to adjust.
1 12-60 F2.8-4.0
2 14-42 F3.5-5.6
1 14-42 F3.5-5.6
2 12-60 F2.8-4.0
1 50-200 F2.8-3.5
DATA LIST
BACK SET
When the same lens is registered
multiple times, the adjustment
value for the lens with v is
applied.
Select which lens to use
when the same lens is
registered multiple times.
Select this to check, delete, or edit
the selected lens.
s0030_e_00_0_unified.book 104 ページ ２００９年７月３日 金曜日 午後４時１１分