Olympus E-600 - Manual (Page 87)

87
EN
6
P
lay
back functi
on
s
Up to 3 frames of RAW images taken with the camera can be overlaid and saved as a
separate image. The image is saved with the record mode set at the time the image is saved.
1
MENU [q] [EDIT] [IMAGE OVERLAY]
2
Select the number of frames to overlay and press the i button.
3
Use p to select a frame and press the i button.
• Repeatedly select images only for the number of frames
selected in Step 2.
• To cancel your selection, press the i button again.
4
Use hi to select an image, then use fg to
select the gain for each image. Press the i
button.
• Select from 0.1 to 2.0.
• The displayed image changes as the gain is adjusted.
5
Use fg to select [YES], then press the i
button.
To overlay 4 or more frames:
j To overlay 4 or more frames, save the overlay image as a RAW file and use [IMAGE OVERLAY]
repeatedly.
x
Notes
• When the record mode is set to [RAW], the overlay image is saved as [YN+RAW].
• When selecting a frame to overlay, the JPEG images for images recorded in JPEG+RAW are
displayed.
Image overlay
 TIPS
IMAGE OVERLAY
RAW RAW RAW RAW RAW RAW
RAW RAW RAW RAW
RAW RAW
RAW RAW
BACK SET
x0.3 x0.3 x0.1 x0.1 x0.3 x0.3
IMAGE OVERLAY
BACK SET
s0030_e_00_0_unified.book 87 ページ ２００９年７月３日 金曜日 午後４時１１分