Olympus SP-820UZ - Manual (Page 40)

40 EN
Connect to the TV video input
jack (yellow) and audio input
jack (white).
AV cable
(sold separately: CB-AVC3)
Connect to the HDMI
connector on the TV.
Multi-connector
HDMI micro connector
(type D)
HDMI cable
(sold separately: CB-HD1)
For details on changing the input source of the TV, refer to the TV’s instruction manual.
When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.
Depending on the TV’s settings, the displayed images and information may become cropped.
To operate images with the TV remote control To operate images with the TV remote control
1 Set [HDMI Control] to [On], and turn off the camera.
2 Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 39)
3 First turn on the TV, and then turn on the camera.
● Operate by following the operation guide that is displayed on the TV.
With some TVs, operations cannot be performed with the TV remote control even though the operation guide is
displayed on the screen.
If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using the
camera.