Olympus E-3 - Manual (Page 56)

56
EN
4
Focusing
an
d shooti
ng functio
n
s
• When the button is released, the currently selected AF target
lights. When M or N is set, you can select the AF target to
be used at that point. For operation, refer to Step 2 in “Selecting
the AF target position” (
gP. 56) in the next section.
• When M or N is set, you can turn the dial to select the AF
target.
• When M or N is set, you can select the AF target with p.
Selecting the AF target position
Select the AF target to use with Single target AF mode.
1
Press the P button and release your finger to enable selection of the AF target.
2
Use the main dial / sub dial or arrow pad to select
the AF target.
• Use the main dial to perform the same operation as
ac, and use the sub dial to perform the same operation
as bd.
• You can change the operation of the dials and arrow pad
for selecting the AF target. g“P SET UP” (P. 97)
• Press the i button to return the position of the AF target
to the center.
Direct button P + k
Super control panel i p: [AF AREA]P
+ k
Menu MENU  [ X][AF AREA] i button MENU button
P button
k