Olympus E-3 - Manual (Page 85)

Pl
ayba
ck fun
cti
o
n
s
7
85
EN
7
Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting.
g“REC VIEW” (P. 108)
1
Press the q button (Single-frame playback).
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours
(factory default setting). Turn on the camera again.
2
Use p to select images you want to view. You can
also turn the dial to switch to U for close-up
playback.
Single-frame / Close-up playback
j
INFO button
< button
p q button
k
L N N
Press p to change the
close-up position.
Press p to move the display
of the close-up position.
Press p to view frame-by-
frame close-ups.
• Press the
INFO button to
return to close-up
playback.
(Single-frame playback) (Close-up playback)
Press the INFO button a : Displays the frame that is stored 10
frames back
c : Displays the frame that is stored 10
frames ahead
d : Displays the next frame
b : Displays the previous frame
(Close-up position playback)
Press the INFO button
(Close-up frame-by-frame playback)
• To exit the playback mode, press the q
button.
• Pressing the shutter button halfway
resumes the shooting mode.
Press the < button
• Plays back the image at a 10x magnified
close-up position.