Olympus E-420 - Manual (Page 114)

Sh
ooting
tip
s
and m
a
intenance
12
114
EN
Error codes
Viewfinder indications Monitor indication Possible cause Corrective action
Normal indication
NO CARD
The card is not
inserted, or it cannot be
recognized. Insert a card or insert a
different card.
CARD ERROR
There is a problem with
the card. Insert the card again. If
the problem persists,
format the card. If the
card cannot be
formatted, it cannot be
used.
WRITE PROTECT
Writing to the card is
prohibited. The card has been set
to read-only setting with
the computer.
Reset the card with the
computer.
No indication
CARD FULL
The card is full. No
more pictures can be
taken or no more
information such as
print reservation can be
recorded. Replace the card or
erase unwanted
pictures.
Before erasing,
download important
images to a PC.
There is no space in the
card and print
reservation or new
images cannot be
recorded. Replace the card or
erase unwanted
pictures.
Before erasing,
download important
images to a PC.
No indication
xD-Picture Cards
cannot be read or is not
formatted. • Select [xD CARD
CLEAN], press the i
button and turn off the
camera. Remove the
card and wipe dry the
metallic surface with a
soft, dry cloth.
• Select [FORMAT]
[YES], and then press
the
i button to
format the card.
Formatting the card
erases all data on the
card.
No indication
NO PICTURE
There are no pictures
on the card. The card contains no
pictures.
Record pictures and
play back.
xD CARD CLEAN
FORMAT
Clean the terminal of the
xD card with the dry cloth.
CARD SETUP
SELECT GO