Olympus E-420 - Manual (Page 92)

92
EN
9
Customi
zin
g your
ca
m
e
ra
FRAME ASSIST (Ruled lines display)
During live view, you can display the ruled lines on the LCD monitor as a guide when confirming
the composition. Press the
INFO button repeatedly to display the ruled lines.
g“Switching the information display” (P. 42)
Custom Menu 1d EXP / e / ISO
ISO-AUTO SET
You can set the upper limit when ISO is set to [AUTO].
This sets the upper limit of the ISO value that automatically changes. The upper limit can be set
from 100 to 1600.
ISO-AUTO
You can set the shooting mode in which the ISO [AUTO] setting is activated.
[P / A / S]
The [AUTO] setting is activated in all shooting modes except M mode. When [AUTO] is
selected in M mode, ISO 100 is set.
[ALL]
The [AUTO] setting is activated for all shooting modes. The ISO is automatically
selected to obtain the optimal ISO even in M mode.
AEL Metering
You can set the metering mode when pressing the AEL / AFL button to lock the exposure.
• [AUTO] performs metering in the mode selected under [METERING].
BULB TIMER
You can select the maximum time (in minutes) for bulb shooting.
Custom Menu 1e # CUSTOM
w+F
When set to [ON], it will be added to the exposure compensation value and flash intensity
control will be performed.
AUTO POP UP
In AUTO or scene mode, the built-in flash pops up automatically in low light or backlight
conditions. When set to [OFF], the built-in flash will not pop up automatically.