Olympus LS-100 - Manual (Page 100)

100
EN
6
Fil
e
m
e
nu
File menu [File Menu]
8
Press the
OK button.
• The animation is displayed on the
screen, and the bounce process starts.
When [Done] is displayed, bouncing is
finished.
• When the bounce process completes,
the new PCM format [44.1kHz/16bit]
file is saved in the project.
A
•
When [Bounce] ( ☞ P. 107) is set to the
Fn
button, pressing the allocated button starts the
bounce process.
Note
• [ Bounce ] does not function in the recorder
mode.
2
Press the
OK button.
3
Press the
+/-/9/0 button to
select the project for the bounce
process.
4
Press the
OK button.
• The screen shifts to the Multi-Track
screen.
5
[Menu]
{
[File Menu]
{
[Bounce]
7
Press the
+ button to select [Start].
6
Press the
OK button.
• The bounce check window appears.