Brinkmann 7541 Series - Manual (Page 25)

Step 3
Attach back panel to left and right
leg of cart assembly using four
M6 X 12mm bolts (black) and star
washers (black).
Note: With the help of a friend,
turn the cart over. Try to
minimize the stress to the
side panels.
Step 4
Attach locking casters to the bottom
of the cart. Tighten caster bolts
securely using hex nut wrench
provided in parts pack.
Note: With the help of a friend,
turn the cart to its upright
position.
Step 5
Attach rear heat shield brace using
two M6 X 12mm bolts (black) and
star washers (black).
24
Locking Caster
Hex Nut Wrench
Heat Shield Brace