Brinkmann 7541 Series - Manual (Page 29)

28
Step 13
Attach side burner to right side of
cart frame assembly. Insert two
M6 X 12mm bolts (black) into both
right legs halfway. Place side burner
over bolts and slide toward back of
grill, then tighten securely. Fasten
side table front panel to grill body
with one M6 X 12mm bolt (black).
Step 14
Remove two bolts and washers
from the side burner valve. Insert
the side burner valve assembly
through the hole in the side burner
front panel, then firmly seat the
valve nozzle into the burner venturi.
Hold in place while you perform
Step 15.
Warning: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in this
manual for proper
procedures.
Side
Burner
Valve
Burner Venturi
Valve
Nozzle