Olympus FE-5040 - Manual (Page 41)

41 EN
For information on using the menus, see “Using the Menu” (p. 4).
Copying pictures to a computer without Copying pictures to a computer without
using the supplied software
using the supplied software
This camera is compatible with the USB Mass
Storage Class. You can transfer and save the image
data on your computer while the camera and the
computer are connected.
System requirements System requirements
Windows 2000 Professional/
Windows XP/Windows Vista/Windows 7/
Mac OS X v10.3 or later
Even if a computer has USB ports, proper operation
is not guaranteed in the following cases.
computers with USB ports installed using an
expansion card, etc.
computers without a factory-installed OS and
home-built computers
Turning on the camera with the Turning on the camera with the q q
button [ button [ q q POWER ON] POWER ON]
r (Settings 1) X
q POWER ON
Submenu 2 Application
NO
The camera is not turned on. To turn
on the camera, press the n
button.
YES
Press and hold the q button to turn
the camera on in playback mode.
●
●
Saving the mode when the camera is Saving the mode when the camera is
turned off [KEEP
turned off [KEEP K K SETTINGS] SETTINGS]
r (Settings 1) X KEEP K SETTINGS
Submenu 2 Application
YES
The shooting mode is saved when
the camera is turned off and is
reactivated the next time the camera
is turned on.
NO
The shooting mode is set to P mode
when the camera is turned on.
Choosing the opening screen display Choosing the opening screen display
[PW ON SETUP]
[PW ON SETUP]
r (Settings 1) X PW ON SETUP
Submenu 2 Application
OFF No opening screen is displayed.
ON
The opening screen is displayed
when the camera is turned on.