Camera menu, Adjusting the color of a picture, Changing the iso sensitivity – Olympus µ 830 User Manual

Page 24: Using sequential (continuous) shooting, P. 24, Menu ope rati ons

Advertising
background image

Menu ope

rati

ons

24

EN

[

e SHOOT & SELECT1]/[f SHOOT & SELECT2]

• These scene modes allow you to take sequential pictures by holding down the shutter

button. After shooting the pictures, select the ones you want to erase by marking them with
a R and press

f/S to erase them.

You can take a sequence of pictures at one time by holding down the shutter button. The
camera will take pictures continuously until you release the shutter button.

CAMERA MENU

WB

................................................................................................. Adjusting the color of a picture

AUTO

The white balance is adjusted automatically for natural color,
regardless of the light source.

5

Sunny day

For shooting under a clear sky.

3

Cloudy day

For shooting under a cloudy sky.

1

Tungsten light For shooting under tungsten lighting.

w

Fluorescent
lamp 1

For shooting under daylight fluorescent lighting. (This type of lamp is
mainly used in homes.)

x

Fluorescent
lamp 2

For shooting under a neutral white fluorescent lamp. (This type of
lamp is mainly used in desk lamps.)

y

Fluorescent
lamp 3

For shooting under a white fluorescent lamp. (This type of lamp is
mainly used in offices.)

ISO

...................................................................................................... Changing the ISO sensitivity

AUTO

Sensitivity is automatically adjusted according to the conditions of the
subject.

HIGH ISO AUTO

This function uses higher sensitivity compared to [AUTO] to minimize blur
caused by a moving subject or by camera movement.

64/100/200/400/
800/1600

A low value lowers the sensitivity for daylight shooting of clear, sharp
pictures. The higher the value, the better the camera’s light sensitivity and
ability to shoot with a fast shutter speed and in low light conditions.
However, high sensitivity introduces noise into the resulting picture, which
may give it a grainy appearance.

DRIVE

.............................................................................Using sequential (continuous) shooting

o

Shoots 1 frame at a time when the shutter button is pressed.

j

Focus and exposure are locked at the first frame. The sequential shooting
speed varies depending on the image quality setting.

W

Pictures can be taken at a faster speed than normal sequential shooting.

Selected picture.

e

e

GO

OK

BACK

MENU

S

Press

43 to scroll through the pictures.

Pictures with a R mark are erased.

Press

e to set or cancel the R mark on the picture.

4

Advertising