Olympus µ 830 - Manual (Page 31)

Me
nu opera
tions
EN
31
This function extracts 9 frames from a movie and saves them as a new picture (INDEX)
containing thumbnails of each frame.
• Select a movie with
43, and press e.
• The [BUSY] bar will be temporarily displayed.
This function allows you to save printing data (the number of prints and the date and time
information) with the pictures stored on the card.
g “Print settings (DPOF)” (P. 41)
Protected pictures cannot be erased with [ERASE], [SEL.IMAGE],
or [ALL ERASE], but they are all erased by formatting.
• Select the picture with
43, and protect it by selecting [ON] with
12. You can protect several frames in succession. 9 is
displayed when the picture is protected.
Pictures taken with the camera held vertically are displayed horizontally during playback. This
function lets you rotate such pictures so that they are displayed vertically on the monitor, and
the new picture orientations will be saved even after the power is turned off.
Select a picture with
43, and use 12 to select [+90°], [0°], or [-90°]. You can rotate several
frames in succession.
INDEX ................................................................................ Making an index picture from a movie
PRINT ORDER Making print reservations (DPOF)
PLAYBACK MENU
0
.....................................................................................................................Protecting pictures
OFF /ON
y
........................................................................................................................... Rotating pictures
+90 / 0 /-90
OK SET MENU BACK
[ x D ] [ ] [ ] I N D E X
6
7
OK EXIT
OFF
ON
[ I N ] [ ] [ ]
0
OK EXIT
[ I N ]
y
+90
OK
[ I N ]
EXIT
y
0 -90
OK EXIT
[ I N ]