Belkin F1U126-KIT - Manual (Page 23)

19
Using the Bitronics Software (continued)
EXAMPLE: Sharing One Printer and a Zip ® Drive (or any other mass
storage device)
When dealing with a mass storage device (devices that add a drive letter to
your system like E:) such as a Zip
® Drive, the Bitronics Software in the system
tray must be configured so that the Bitronics switch is defaulted to the Port
attached to the Zip
® Drive. It is necessary for the switch to always remain
connected to the Zip ® Drive so that any time you access that drive, you will
always be connected, and not receive error messages:
1. Make sure that the port that connects to the Zip ® Drive is set to
“Mass Storage Device” in “Settings”. See above for more info. The
image below shows the Zip
® Drive is connected to Port A, and that
the device type is “Mass Storage Device”. Type anything you want
in “Display Name”. Click “OK” when finished.
En
P73121/F1U126-KIT/EU/man.qxd 4/28/00 1:06 PM Page 19