Appendix, Continued) – Belkin F1U126-KIT User Manual
Page 30
Appendix
(continued)
Configuration” on some models).
4.
Choose the parallel port mode with the highest performance (e.g. “ECP”).
5.
Follow the legend directions to save the setting and exit “Setup”.
Steps for the Force 443 CD, AMBIOS BIOS v 1.00.12.1313oe
1.
While the computer is booting, follow the directions on the screen: Press F1 to
Enter “Setup”.
2.
Select “Advanced” from the menu bar.
3.
Use the down-arrow key to select “Peripheral Config” and then press ENTER.
4.
Use the down-arrow key to select “Parallel Port Mode” and then press ENTER.
5.
Use the down-arrow key to select “Extended” (originally “Compatible”) and then
press ENTER.
6.
Press F10 to save the setting.
Sony
Models PCV-70/90/100/120:
1.
Restart your computer.
2.
During the first black and white Sony screen, press F3 to enter the boot screen.
3.
Press F1 to enter the “BIOS Setup”.
4.
Use right-arrow to reach the “Advanced” menu.
5.
Scroll down and highlight “Peripheral Configuration” and press ENTER.
6.
Scroll down and highlight “Parallel Port Type”. The default setting is
“Compatible”. Press ENTER.
7.
Select “ECP” and press ENTER.
8.
Press ESC twice to get to the “Exit” screen.
9.
Press ENTER twice to “Exit Saving Changes”. The system will restart into Windows
®
.
Models PCV-130/150:
1.
Restart your computer.
2.
During the first black and white Sony screen, press F3 to enter the boot screen.
3.
Press F1 to enter the “BIOS Setup”.
4.
Use right-arrow to reach the “Advanced” menu.
5.
Scroll down and highlight “Peripheral Configuration” and press ENTER.
6.
Scroll down and highlight “Mode”. The default setting is “ECP”. Press ENTER.
7.
Select “ECP”. Press ENTER.
8.
Scroll to “Parallel Port” and press ENTER.
9.
Select “Enabled” and press ENTER.
10. Press ESC twice to get to the “Exit” screen.
11. Press ENTER twice to “Exit Saving Changes”. The system will restart into Windows
®
.
Models PCV-200/210/220/230/240:
1.
Restart your computer.
2.
During the first black and white Sony screen, press F3 to enter the boot screen.
3.
Press F1 to enter the “BIOS Setup”.
4.
Use right-arrow to reach the “Advanced” menu.
5.
Scroll down and highlight “Peripheral Configuration” and press ENTER.
6.
Scroll down and highlight “Mode”. The default setting is “ECP”. Press ENTER.
26
P73121/F1U126-KIT/EU/man.qxd 4/28/00 1:06 PM Page 26