How to connect the underwater flash, Connecting the underwater optical fiber cable – Olympus PT-EP03 User Manual
Page 16
EN 15
En
4. How to connect the underwater flash
Connecting the underwater optical fiber cable
To connect the UFL-2 underwater flash (optional) to the Case using an underwater optical fiber cable
(optional: PTCB-E02), follow the procedures below.
Setting of the digital camera
Set the RC mode of the camera to ON so that the camera's built-in flash is activated.
In case of UFL-2, turn the RC mode to OFF.
For details, refer to the instruction manual of UFL-2.
In case of UFL-1, plug the optical fiber cable in the same way.
Turn the RC mode of the camera to OFF.
How to connect the underwater optical fiber
cable
1
Remove the cap of the optical fiber cable
insertion slot.
2
Put the underwater optical fiber cable plug all the
way into the optical fiber cable insertion slot.
PT-EP03_EN.Book Page 15 Wednesday, October 13, 2010 11:28 AM