Billion Electric Company 400G - Manual (Page 26)

Billion 400G Router
Chapter 4: Configuration
23
6. Configure the Wireless LAN setting.
WLAN Service: Default setting is set to Enable. If you want to use wireless, both 802.11g and 802.11b device in
your network, you can select Enable.
ESSID: The ESSID is the unique name of a wireless access point (AP) to be distinguished from another. For
security propose, change to a unique ID name to the AP which is already built-in to the router’s wireless interface. It
is case sensitive and must not excess 32 characters. Make sure your wireless clients have exactly the ESSID as the
device, in order to get connected to your network.
ESSID Broadcast: It is function in which transmits its ESSID to the air so that when wireless client searches for a
network, router can then be discovered and recognized. Default setting is Enable.
Enable: When Enable is selected, you can allow anybody with a wireless client to be able to locate the
Access Point (AP) of your router.
Disable: Select Disable if you do not want broadcast your ESSID. When select Disable, no one will be
able to locate the Access Point (AP) of your router.
Channel ID: Select the ID channel that you would like to use.
Security Mode: You can disable or enable with WPA or WEP for protecting wireless network. The default mode of
wireless security is Disable.
7. Wait for the configuration.