Brother MFC 8890DW - Manual (Page 10)

10
13
Dial Prefix
The dial prefix setting will automatically dial a
predefined number before every fax number you dial.
For example: If your phone system requires a 9 to dial
an outside number this setting will automatically dial 9
for every fax you send.
a
Press Menu.
b
Press 0.
c
Press 5 (For Canada, press 6).
d
Enter the prefix number (up to 5 digits) on the
dial pad, and then press OK.
e
Press Stop/Exit.
14
Automatic Daylight
Savings Time
You can set the machine to change automatically for
daylight savings time. It will reset itself forward one
hour in the Spring and backward one hour in the Fall.
a
Press Menu.
b
Press 1.
c
Press 4.
d
Press or to choose On (or Off).
Press OK.
e
Press Stop/Exit.
15 Send in the Product
Registration and Test
Sheet (USA only)
You can also register your product online using the
On-Line Registration link from the installation
CD-ROM or visit
http://www.brother.com/registration/.
a
Fill out the Product Registration and Test
Sheet.
b
Put the sheet face up in the ADF (Automatic
Document Feeder) or face down on the
scanner glass.
c
Make sure (Fax) is illuminated in Blue.
d
Enter the toll-free fax number: 1-877-268-9575.
e
Press Start.
Note
• You can use the number 0 to 9, #, l and !.
(Press Hook to display “!”.)
You cannot use ! with any other numbers or
characters.
If your telephone system requires a timed
break recall (hookflash), press Hook to enter
the break.
• If the pulse dialing mode is on, # and l are not
available to use. (Canada only)
Note
You will receive a confirmation fax of your Product
Registration.