Pioneer AVIC-X1 - Manual (Page 15)

13
Ch
ap
te
r
1
H
ow
to
U
se Na
vig
ati
o
n
U
n
it a
n
d
Na
m
es
o
f t
h
e Pa
rts
Turning the unit on and
selecting a source
• If the program is not installed, see
“Operation Manual” and install the
program.
1
Turn the ignition switch (ACC) ON.
The product’s power supply comes on.
2
Press SRC button to select a source.
Press SRC button repeatedly to switch
between the following sources:
DAB (digital audio broadcasting) – RADIO
(tuner) – TV (television) – AV (video input) –
DISC [CD, MP3, CD/MP3] (built-in DVD drive)
– S-DVD (DVD player/multi-DVD player) –
M-CD (multi-CD player) – EXT-1 (external
unit 1) – EXT-2 (external unit 2) – AUX
(Auxiliary equipment)
❒
Press and hold to turn the source off.
❒ In the following cases, the sound source will
not change to them:
– When a unit corresponding to each source
is not connected to this unit.
– When no disc (DVD-video, CD) is set in this
unit.
– When no disc is set in the DVD-player (S-
DVD).
– When no magazine is set in the multi-CD
player.
– When no magazine is set in the multi-DVD
player.
– When the AUX (auxiliary input) is set to off
(refer to Operation Manual).
– When the AV (video input) is not set to
VIDEO (refer to Operation Manual).
❒ External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two
external units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
❒ When this unit’s blue lead is connected to the
vehicle’s auto-aerial relay control terminal, the
vehicle’s aerial extends when ACC (ignition) is
turned on and attach the front panel. To
retract the antenna, detach the front panel.
The vehicle’s aerial extends regardless of
turning this unit’s source on or off.
MAN-AVIC-X1-EN HW.book Page 13 Friday, January 16, 2004 11:41 AM