Pioneer DEH-3200UB - Manual (Page 16)

16
EN
G
L
IS
H
Operating this unit
Pause (pause)
• Refer to “Pause (pause)” on page 13.
Audiobooks (audiobook speed)
The playback speed of audiobook can be changed.
1. Press M.C. to display the setting mode.
2. Turn M.C. to select your favorite setting.
• Faster – Playback faster than normal speed
• Normal – Playback in normal speed
• Slower – Playback slower than normal speed
3. Press M.C. to confirm the selection.
S.Rtrv (sound retriever)
• Refer to “S.Rtrv (sound retriever)” on page 13.
Notes
• Operation is complete even if the menu is cancelled before being confirmed.
• Switching the control mode to iPod pauses song playback. Operate the iPod to resume
playback.
• The following functions are still accessible from the unit even if the control mode is set to
iPod.
– Volume
– Fast forward/reverse
– Track up/down
– Pausing
– Switching the text information
• When the control mode is set to iPod, operations are limited as follows:
– Only CTRL (control mode), Pause (pause) and S.Rtrv (sound retriever) functions are
available.
– Browse function cannot be operated from this unit.
Audio Adjustments
1. Press M.C. to display the main menu.
2. Turn M.C. to change the menu option and press to select AUDIO.
3. Turn M.C. to select the audio function.
After selecting, perform the following procedures to set the audio function.
FAD/BAL (fader/balance adjustment)
1. Press M.C. to display the setting mode.
2. Press M.C. to cycle between fader and balance.
3. Turn M.C. to adjust the speaker balance.
Adjustment range (front/rear): F-F15 to F-R15
Adjustment range (left/right): B-L15 to B-R15
• F-0 is the proper setting when only two speakers are used.
• Only for DEH-3200UB.
When the rear output setting and preout setting are SUBW, you cannot adjust front/
rear speaker balance.
Preset EQ (equalizer recall)
1. Press M.C. to display the setting mode.
2. Turn M.C. to select an equalizer curve.
Powerful – Natural – Vocal – Custom1 – Custom2 – Flat – Super bass
• When Flat is selected no adjustments are made to the sound.
3. Press M.C. to confirm the selection.
Graphic EQ (equalizer adjustment)
You can adjust the currently selected equalizer curve setting as desired. Adjusted
equalizer curve settings are memorized in Custom1 or Custom2.
• A separate Custom1 curve can be created for each source. If you make
adjustments when a curve other than Custom2 is selected, the equalizer curve
settings will be memorized in Custom1.
• A Custom2 curve can be created common to all sources. If you make adjustments
when the Custom2 curve is selected, the Custom2 curve will be updated.
1. Press M.C. to display the setting mode.
2. Press M.C. to cycle between equalizer band and level.
3. Press M.C. to switch to equalizer band and then turn M.C. to select.
100Hz – 315Hz – 1.25kHz – 3.15kHz – 8kHz
4. Press M.C. to switch to level and then turn M.C. to adjust.
Adjustment range: +6 to –6
MAN-DEH3200UB-GB.fm Page 16 Tuesday, November 17, 2009 2:25 PM