Connections, En g l is h – Pioneer DEH-3200UB User Manual

Page 4

Advertising
background image

4

EN
G

L

IS

H

Connections

Note
Depending on the kind of vehicle,
the function of 2* and 4* may be
different. In this case, be sure to
connect 1* to 4* and 3* to 2*.

This product

Antenna

jack

Fuse (10 A)

Connect leads of the
same color to each other.

Yellow (2*)

Back-up (or

accessory)

Red (4*)

Accessory (or

back-up)

Yellow (1*)
Connect to the constant 12 V supply terminal.

Red (3*)
Connect to terminal controlled by ignition
switch (12 V DC).

ISO connector
Note
In some vehicles, the ISO connector may
be divided into two. In this case, be sure to
connect to both connectors.

Black (chassis ground)
Connect to a clean, paint-free metal location.

Speaker leads
White: Front left

+

White/black: Front left

-

Gray: Front right

+

Gray/black: Front right

-

Green: Rear left

+ or subwoofer +

Green/black: Rear left

- or subwoofer -

Violet: Rear right

+ or subwoofer +

Violet/black: Rear right

- or subwoofer -

Blue/white (6*)
Connect to auto-antenna relay
control terminal (max. 300 mA
12 V DC).

Blue/white (5*)

Rear output or
subwoofer output
(DEH-3200UB)

Power amp (sold
separately)

Connect with RCA cables (sold separately)

System remote control

Rear

speaker

Rear
speaker

Perform these connections when
using the optional amplifier.

Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).

Yellow/black
If you use an equipment with Mute
function, wire this lead to the Audio
Mute lead on that equipment. If not,
keep the Audio Mute lead free of any
connections.

To rear output

Notes
• Change the initial setting of this unit (refer to the
operation manual). The subwoofer output of this unit
is monaural (DEH-3200UD).
• When using a subwoofer of 70 W (2

$), be sure to

connect with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black
leads.

Rear output
(DEH-4200SD)

Front output
(DEH-4200SD)

Subwoofer output
(DEH-4200SD)

The pin position of the ISO
connector will differ depending
on the type of vehicle. Connect
5* and 6* when Pin 5 is an
antenna control type. In
another type of vehicle, never
connect 5* and 6*.

Blue/white
Connect to system control terminal
of the power amp (max. 300 mA
12 V DC).

Power amp (sold
separately)

Power amp (sold
separately)

Power amp (sold
separately)

To front output

To subwoofer output

For DEH-4200SD

For DEH-3200UB

Rear
speaker

Front

speaker

Front
speaker

Subwoofer

Subwoofer

Power amp (sold
separately)

To rear output or
subwoofer output

Connect with RCA
cable (sold separately)

System remote control

Rear speaker or

subwoofer

Rear speaker or
subwoofer

MAN-DEH3200UB-GB.fm Page 4 Tuesday, November 17, 2009 2:25 PM

Advertising
This manual is related to the following products: