Pioneer AVIC700D - Manual (Page 151)

150
■Adjusting loudness
Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.
1 Press 5 or ∞ to select “LOUDNESS” from the AUDIO MENU, and press A.MENU
(AUDIO) button.
2 Press 5 to turn loudness on.
Loudness level (e.g., LOUDNESS:ON/MODE:MID) appears in the display.
3 Press 2 or 3 to select the level.
LOW - MID - HIGH
4 Press
∞ to turn loudness off.
■Using subwoofer output
Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) is equipped with a subwoofer out-
put which can be switched on or off.
1 Press 5 or ∞ to select “SUB WOOFER” from the AUDIO MENU, and press A.MENU
(AUDIO) button.
When the subwoofer controller setting is S.W. CONTROL:EXTERNAL, you cannot
select SUB WOOFER.
2 Press 3 to turn subwoofer output on.
➲
You can turn off subwoofer output by pressing
2 2 2 2
. If you do not set to “ON”, you cannot
select “PHASE”, “LEVEL” or “FREQUENCY”.
3 Press 5 or ∞ to select the item you want to adjust.
4 Press
2 or 3 to adjust the item.
➲
Only frequencies lower than those in the selected range are output from the subwoofer.
■Using non fading output
When the non fading output setting is on, the audio signal does not pass through Pioneer AV
Head Unit’s (AVH-P6400CD or AVH-P6400R) low pass filter (for the subwoofer), but is out-
put through the RCA output.
When the non fading output is on, you can adjust the level of non fading output.
PHASE : NORMAL - REVERSE
LEVEL : +6 - -6
FREQUENCY : 50Hz - 80Hz - 125Hz
CRB1875A_Eng.book Page 150 Thursday, March 27, 2003 1:22 PM