Checking the set route from the information menu – Pioneer AVIC700D User Manual
Page 52
51
Chapter
2
Setting a Route to
Y
our Destination
■Checking the set route with text
1
Press the DETOUR button on the Remote Control for more than two seconds.
The screen to select the checking method appears.
2
Select “Route Profile”and click the OK button.
3
Check the contents on the display.
As necessary, move the joystick up or down to scroll the list.
4
Press the BACK button.
You can return to the previous display.
➲
When a long distance route is calculated, your Navigation System may not be able to
list all the roads. (In this case, the remaining roads will be shown in the list as you drive
on.)
■Checking the set route from the Information menu
You can also check the information about the set route from the Information menu.
1
Select “Information” from the Main menu, then “Route Information”. Click the OK
button.
The screen to select the checking method appears.
2
Select the checking method.
3
Check the contents on the display.
4
Press the BACK button.
You can return to the previous display.
Name of the streets you drive through
Driving distance
CRB1875A_Eng.book Page 51 Thursday, March 27, 2003 1:22 PM