Pioneer PDP-LX5090 - Manual (Page 24)

Watching TV 06
24
En
1 Press c to select the display mode.
Each time you press c, the display mode is switched among 2-
screen, picture-in-picture, and single-screen.
• In 2-screen or picture-in-picture mode, press to switch the
position of the two screens shown.
The left screen (in the 2-screen mode) or the larger screen (in the
picture-in-picture mode) is the active screen which will be
indicated by “
z”. The user is allowed to operate picture and sound.
• In picture-in-picture mode, press to move the position of the
small screen anticlockwise.
2 To select the desired input source, press the appropriate input
source button.
If watching TV programmes, press
P+/P– to change the channel.
Note
• The multiscreen function cannot display images from the same
input source at the same time. If you make such an attempt, a
warning message appears.
• The multiscreen function cannot display images from
combinations of two external input sources (“INPUT 1” to
“INPUT 5”, “PC”). It can display images from the following
combinations of input sources.
- Analogue TV (or digital TV) and external source
(“INPUT 1” to “INPUT 5”, “PC”)
• When you press HOME MENU, the single-screen mode is
restored and the corresponding menu is displayed.
• When in the 2-screen mode, images displayed on the right
screen may look less fine, depending on the images.
• While in the 2-screen or picture-in-picture mode, the analogue
favourite channel list is not available. While in the 2-screen or
picture-in-picture mode, the digital channel list is not available.
Freezing images
Use the following procedure to capture and freeze one frame from
a moving image that you are watching.
• Before operating with the remote control unit, make sure to select
the TV mode using its SELECT button. See Controlling other
equipment using the supplied remote control unit on page 69.
Important
• Displaying a static image for a long period of time, or for shorter
periods of time everyday, may result in image retention.
1 Press d.
A still image appears on the right screen while a moving image is
shown on the left screen.
2 Press d again to cancel the function.
Note
• You cannot freeze the picture when using the 2-screen or
picture-in-picture mode.
• When this function is not available, a warning message
appears.
DVD TOOLS HDD
Normal image Still image
PDP-LX6090.book Page 24 Monday, February 25, 2008 10:08 AM