Pioneer AVH-X7500BT - Manual (Page 64)

64
EN
G
L
IS
H
Additional information
Using the display correctly
! CAUTION
• If liquid or foreign matter should get inside this unit, turn off the power immediately
and consult your dealer or the nearest authorized PIONEER Service Station. Do not
use the unit in this condition because doing so may result in fire, electric shock, or
other failure.
• If you notice smoke, a strange noise or smell, or any other abnormal signs from the
display, turn off the power immediately and consult your dealer or the nearest
authorized PIONEER Service Station. Using this unit in this condition may result in
permanent damage to the system.
• Do not disassemble or modify this unit, as there are high-voltage components inside
which may cause electric shock. Be sure to consult your dealer or the nearest
authorized PIONEER Service Station for internal inspection, adjustments, or
repairs.
Handling the display
• Never touch the screen with anything besides your finger when operating the touch
panel function. The screen can scratch easily.
• When the display is subjected to direct sunlight for a long period of time, it will
become very hot resulting in possible damage to the LCD screen. You should avoid
exposing the display unit to direct sunlight as much as possible.
• The display should be used within the temperature range of –10 °C to +60 °C.
• At temperatures higher or lower than this operating temperature range, the display
may not operate normally.
• The LCD screen is exposed in order to increase its visibility within the vehicle. Do
not press it strongly on it as this may damage it.
• Do not push the LCD screen forcefully as this may scratch it.
Liquid crystal display (LCD) screen
• Heat from the heater may damage the LCD screen, and cool air from the cooler may
cause moisture to form inside the display resulting in possible damage.
• Small black dots or white dots (bright dots) may appear on the LCD screen. These
are due to the characteristics of the LCD screen and do not indicate a malfunction.
• When using a cellular phone, keep the antenna away from the display to prevent
disruption of the video image by the appearance of spots, colored stripes, etc.
LED (light-emitting diode) backlight
• At low temperatures, using the LED backlight may increase image lag and degrade
the image quality due to the characteristics of the LCD screen. Image quality will
improve with an increase in temperature.
• To protect the LED backlight, the display will darken in the following environments:
– In the direct sunlight
– Near the heater vent
• The product lifetime of the LED backlight is more than 10 000 hours. However, it may
decrease if used in high temperatures.
• If the LED backlight reaches the end of its product lifetime, the screen will become
dark and the image will no longer be projected. In such cases, please consult your
dealer or the nearest authorized PIONEER Service Station.
Keeping the display in good condition
• When removing dust from the screen or cleaning the display, first turn the system
power off, then wipe with a soft dry cloth.
• When wiping the screen, take care not to scratch the surface. Do not use harsh or
abrasive chemical cleaners.
Bluetooth profiles
In order to use Bluetooth wireless technology, devices must be able to interpret certain
profiles. This unit is compatible with the following profiles.
• GAP (Generic Access Profile)
• SDP (Service Discovery Protocol)
• OPP (Object Push Profile)
• HFP (Hands Free Profile)
• HSP (Head Set Profile)
• PBAP (Phone Book Access Profile)
• A2DP (Advanced Audio Distribution Profile)
• AVRCP (Audio/Video Remote Control Profile) 1.3
13-MAN-AVH7500-GB.fm Page 64 Thursday, February 28, 2013 10:20 AM