Pioneer PDP-503HDE - Manual (Page 36)

34
MENU
Picture
DYNAMIC
Advanced
Black & White [On]
Off
On
MENU
Picture
DYNAMIC
Advanced
PureCinema [On]
Off
On
ENTER
MENU
AV
SELECTION
/
Basic adjustment settings
PureCinema
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyses it then
recreates each still film frame for high-definition picture
quality.
1
Press MENU.
2 Press / to select “Picture”, and then press
ENTER.
3
Press / to select “Advanced”, and then press
ENTER.
4
Press / to select “PureCinema”, and then press
ENTER.
5
Press / to select “On”, and then press ENTER.
6
Press MENU to exit the menu.
A
• Return to the previous menu by pressing n.
• If you select “STANDARD” with AV SELECTION on the
remote control unit, or input sources with vertical
frequency 50 Hz (e.g. PAL, SECAM etc.), this item will
display in gray and not be selectable. See page 50.
Black & White
For viewing a video in monochrome.
1
Press MENU.
2
Press / to select “Picture”, and then press
ENTER.
3
Press / to select “Advanced”, and then press
ENTER.
4
Press / to select “Black & White”, and then press
ENTER.
5
Press / to select “On”, and then press ENTER.
6
Press MENU to exit the menu.
A
• Return to the previous menu by pressing n.
• If you select “STANDARD” with AV SELECTION on the
remote control unit, this item will display in gray and
not be selectable. See page 50.
PDP-503HDE/(E)-c 8/31/02, 5:48 PM 34