Pioneer AVIC-F860BT - Manual (Page 139)

1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The
“System” screen appears.
3 Touch [Camera settings].
The following screen appears.
4 Touch [Camera Polarity] repeatedly
until the desired setting appears.
! Battery (default):
When the polarity of the connected lead is
positive while the gearstick is in the RE-
VERSE (R) position.
! Ground:
When the polarity of the connected lead is
negative while the gearstick is in the RE-
VERSE (R) position.
When the gearstick is moved to the REVERSE
(R) position after setting the rear view camera,
the rear view image appears.
Setting the camera for
Camera View mode
To display Camera View at all times,
“Camera
View
” needs to be set to “On”.
p To set the rear view camera for Camera
View mode,
“Back Camera Input” needs
to be set to
“On”.
= For details, refer to Setting rear view camera
activation on page 138.
p To set the 2nd camera for Camera View
mode,
“AV Input” needs to be set to “Cam-
era
”.
= For details, refer to Setting AV input on page
137.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The
“System” screen appears.
3 Touch [Camera settings].
The following screen appears.
4 Touch [Camera View] repeatedly until
the desired setting appears.
! Off (default):
Turns the camera view setting off.
! On:
Turns the camera view setting on.
If no operations are performed for seven sec-
onds after the AV operation screen is dis-
played, the camera view will appear
automatically.
p If you touch the screen while the camera
view is displayed, the displayed image will
turn off temporarily.
When the camera view of both rear view cam-
era and 2nd camera are available, the key to
switch the display appears.
Engb
139
Chapter
28
System
settings
System settings