Pioneer AVIC-F860BT - Manual (Page 168)

The audio language is set.
p If the selected language is not available, the
language specified on the disc is displayed.
p You can also switch the audio language by
touching the switch audio languages key
during playback.
p The setting made here will not be affected
even if the audio language is switched dur-
ing playback using the switch audio lan-
guages key.
Setting the menu language
You can set the preferred language in which
the menus recorded on a disc are displayed.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The
“Video Setup” screen appears.
3 Touch [DVD/DivX Setup].
The following screen appears.
4 Touch [Menu Language].
The pop-up menu appears.
5 Touch the desired language.
When you select
“Others”, a language code
input screen is shown. Input the four-digit
code of the desired language then touch
.
= For details, refer to Language code chart for
DVDs on page 173.
The menu language is set.
p If the selected language is not available, the
language specified on the disc is dis-
played.
Setting the angle icon display
The angle icon can be set so it appears on
scenes where the angle can be switched.
p This setting is available when the selected
source is
“Disc”, “CD”, “Video CD” or
“DVD”.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The
“Video Setup” screen appears.
3 Touch [DVD/DivX Setup].
The following screen appears.
4 Touch [Multi Angle] repeatedly until
the desired setting appears.
! On (default):
Turns the multi-angle setting on.
! Off:
Turns the multi-angle setting off.
Engb
168
Chapter
31 Setting up the video player