Pioneer BCS-HF828 - Manual (Page 38)

Connecting 38
En
Connec
ting
2
3. Secure the speaker and the pole with 2
screws. Ensure that the speaker wire does
not get pinched between the speaker and
the pole. The height of the speaker stands
can be adjusted in two levels; select the
height you prefer, and fix in position.
4. Connect the wires to the player.
Insert the cables connected to the player to
the same colored connector on the speaker.
For direct installation
Use the supplied adhesive to attach 4 pads to
the base of the front speakers.
Caution
• Do not connect any speakers other than those
supplied to this system.
• Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
• Please connect the speaker cable of subwoofer
(purple) to orange of the player.
• These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.