Receiving traffic announcements 24, Responding to the tp alarm 24, Receiving traffic announcements – Pioneer AVH-P6400CD User Manual

Page 24

Advertising
background image

En

24

06

Section

RDS

• The preset number may disappear on the

display if the tuner tunes in a regional station
which differs from the originally set station.

REGIONAL

can be turned on or off indepen-

dently for each FM band.

Receiving traffic announcements

TA (traffic announcement standby) lets you
receive traffic announcements automatically,
no matter what source you are listening to. TA
can be activated for both a TP station (a station
that broadcasts traffic information) or an
enhanced other network’s TP station (a station
carrying information which cross-references TP
stations).

1 Tune in a

TP

or enhanced other network’s

TP

station.

2 Press

TA/NEWS

on the head unit to turn

traffic announcement standby on.
Press

TA/NEWS

on the head unit until

T

flash-

ing in the display. The tuner will standby for
traffic announcements.
• To turn traffic announcements standby off,
press

TA/NEWS

on the head unit again.

3 Use

VOLUME

to adjust the

TA

volume when

a traffic announcement begins.
Rotate to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announcements.

4 Press

TA/NEWS

on the head unit while a

traffic announcement is being received to
cancel the announcement.
The tuner returns to the original source but
remains in the standby mode until

TA/NEWS

is

pressed again.

Notes

• You can also turn on or off

TA/NEWS

in the

setting menu that appears with the pressing
of

TA/NEWS

.

• The system switches back to the original

source following traffic announcement recep-
tion.

• Only TP and enhanced other network’s TP

stations are tuned in during seek tuning or
BSM when TA is on.

Responding to the TP alarm

When a TP or enhanced other network’s TP
station is lost due to a weak signal a series of
short beeps, about five seconds long, sound to
remind you to select another TP or enhanced
other network’s TP station.

When listening to the tuner, tune in another

TP

or enhanced other network’s

TP

station

.

• When listening to sources other than the
tuner, the unit will automatically seek out a TP
station with the strongest signal after a 10- or
30-second delay. The delay is 10 seconds if TA is
on and 30 seconds if TA and AF are on.

Advertising
This manual is related to the following products: