Pioneer AVH-P6400CD - Manual (Page 68)

En 68
14
Section
Other Functions
Introduction of set up
Customize the settings to suit your taste and
environment.
1 Press A.MENU in each source display.
MENU is displayed.
2 Press
5 or ∞ to select
SET UP , and press
A.MENU .
SET UP MENU is displayed as follows:
VIDEO SETTING (video setting)
AUTO FLAP (auto flap setting)
CLOCK ADJUST (clock adjust)
You can operate a desired function. For details,
refer to the pages for each of the functions.
Select
BACK in the MENU display or press
BACK to return to the previous display.
Pressing WIDE on the head unit returns you to
the previous display.
• To return to the playback display, press both
BAND/ESC and WIDE on the remote control.
Selecting the video
Set so that only the display video can be
selected. The display for this MENU is the same
regardless of which source you operate from.
1 Press
5 or ∞ to select
VIDEO SETTING from
the SET UP MENU, and press A.MENU .
VIDEO SETTING adjustment indications are
displayed.
2 Press
2/3 to select the
VIDEO .
Press
2 or 3 until the desired video setting
appears in the display.
OFF (off)— VIDEO (video)— BACK UP CAMERA
(back up camera)— M-DVD (Multi-DVD)
• If the equipment is connected to a RCA video
input, choose
VIDEO to view video of the equip-
ment.
• When using a DVD player unit connected with
an RCA cable, if you do not select
M-DVD , there
will be no picture even if you switch sources.
• When using a DVD player unit connected with
an AV-BUS cable, do not select
M-DVD . If you
do, there will be no picture.
• If you select
BACK UP CAMERA , press
∞ to
move to BACK UP POLARITY , or use
2 or 3 to
select BATTERY and GND .
BATTERY : When the gear shift is moved to the
REVERSE (R) position, and the polarity of the
connected lead wire is positive.
GND : When the gear shift is moved to the
REVERSE (R) position, and the polarity of the
connected lead wire (refer to page 30) is nega-
tive.
• This product features a function that automat-
ically switches to the video input into the video
or back camera jack when a back-up camera is
installed on your car. If this is the case, when
the gear shift is in the REVERSE (R) position,
the video automatically switches to video or
back camera. (The default setting is
BATTERY .
For more details, consult with your dealer.)
Notes
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
• If you select BACK UP CAMERA , switching to
the correct video setting may not occur.
Confirm that directly after changing the set-
ting, it changes to VIDEO when the gear shift
is moved to REVERSE from another position.
• If you select BACK UP CAMERA and the dis-
play changes to VIDEO during normal dri-
vings, reverse the settings.