Pioneer AVX-7600 - Manual (Page 12)

Introduction of setup
adjustments
3 2 1
1 Function display
Shows the function names.
2 ESC key
Touch to cancel the control mode of func-
tions.
3 BACK key
Touch to return to the previous display.
1 Touch the screen to activate the touch
panel keys.
The touch panel keys appear on the display.
2 Touch A.MENU to display the function
names.
The function names are displayed and oper-
able ones are highlighted.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.
Note
If you do not operate the setup function within
about 30 seconds, the display is automatically re-
turned to the source display.
Setting the video input 1
You can switch the setting according to the
connected component.
! Select VIDEO to watch video of a con-
nected component as AV-1 source.
1 Touch A.MENU and then touch
AV INPUT1.
2 Touch c or d to select the video input 1
setting.
Touch c or d until the desired setting appears
in the display.
! OFF  No video component is connected
! VIDEO  External video component
Setting the video input 2
You can switch the setting according to the
connected component.
! Select VIDEO to watch video of a con-
nected component as AV-2 source.
! Select B. CAMERA when a rear view cam-
era is installed on your vehicle.
1 Touch A.MENU and then touch
AV INPUT2.
2 Touch c or d to select the video input 2
setting.
Touch c or d until the desired setting appears
in the display.
! OFF  No video component is connected
! VIDEO  External video component
! B. CAMERA  Rear view camera
Other Functions
En
12
Section
05